AHA152X_CS

Section: Devices and Network Interfaces (4)
Updated: 2000/06/12 21:24:47
Index Return to Main Contents
 

NAME

aha152x_cs - Adaptec AHA-152X compatible PCMCIA device driver  

SYNOPSIS

insmod aha152x_cs.o [pc_debug=n] [irq_list=i,j,...] [host_id=n] [reconnect=n] [parity=n] [synchronous=n] [reset_delay=n] [ext_trans=n]  

DESCRIPTION

aha152x_cs is the low-level Card Services driver for various PCMCIA SCSI adapters that are compatible with the Adaptec AHA-152X host adapter. These include the New Media Bus Toaster, the Adaptec AHA-1460, and various other OEM cards.  

PARAMETERS

pc_debug=n
Selects the PCMCIA debugging level. This parameter is only available if the module is compiled with debugging enabled. A non-zero value enables debugging.
irq_list=i,j,...
Specifies the set of interrupts that may be allocated by this driver.
host_id=n
Specifies the SCSI ID of the host adapter. The default host ID is 7.
reconnect=n
Enables support for disconnect/reconnect, if non-zero. The default is 1 (true).
parity=n
Enables SCSI parity checking. The default is 1 (true).
synchronous=n
Enables negotiation of synchronous SCSI transfers. The default is 0 (false).
reset_delay=n
Specifies a delay for SCSI bus resets, in 10 millisecond intervals. The default is 100.
ext_trans=n
Enables the ``extended translation'' scheme for partition tables of drives larger than 1 GB.
 

AUTHOR

David Hinds - dahinds@users.sourceforge.net  

SEE ALSO

cardmgr(8), pcmcia(5).


 

Index

NAME
SYNOPSIS
DESCRIPTION
PARAMETERS
AUTHOR
SEE ALSO

linux.jgfs.net manual pages