Pnmtopclxl User Manual

Section: Misc. Reference Manual Pages (0)
Updated: 20 July 2005
Index Return to Main Contents

 

NAME

pnmtopclxl - convert a PNM image to an HP LaserJet PCL XL printer stream

 

SYNOPSIS

pnmtopclxl [-dpi N] [-xoffs N] [-yoffs N] [-center] [-duplex {vertical|horizontal}] [-format paperformat] [-feeder N] [-copies N] [-colorok] [-rendergray] [-jobsetup=filename] pnmfile1 pnmfile2 ...

 

DESCRIPTION

This program is part of Netpbm(1).

pnmtopclxl reads one or more PNM input streams, each containing one or more PNM images, and generates a sequence of output pages in the HP PCL-XL (formerly named PCL 6) printer control language. You can send this stream to a PCL-XL printer to print the images.

If the input is PPM, the output is a color printer stream (the PCL color space is RGB). Otherwise, the output is grayscale (the PCL color space is grayscale). If you want a grayscale output from a color input, run your input through ppmtopgm(1).Seethe -colorok option for more information about choosing between color and grayscale.

The output goes to Standard Output. All of the pages go to one file, concatenated in the same order as the input images.

 

OPTIONS

-dpi N
This option selects the resolution of the image (not the printer!). N is the resolution in dots per inch, from 1 to 65535. The default is 300.

-xoffs N
This option and -yoffs determine the location on the page of the upper left corner of each image. Note that the image may have built in borders tool, which would make the main image within more left and down that what you specify here.

-xoffs and -yoffs specify the distance from the left of the page and from the top of the page, respectively, in inches, of the upper left corner of the image. The default for each is zero.

These options are meaningless if you specify -center.

-yoffs N
See -xoffs.

-center
This option tells pnmtopclxl to center each image on the page. If you don't specify this option, the position of an image on the page is determined by -xoffs and -yoffs (or their defaults).

-duplex {vertical|horizontal}
This option causes pnmtopclxl to create a printer stream that prints pages on boths sides of the sheet of paper. vertical means to print them so that the left edge of both pages is on the same edge of the sheet, while horizontal means the more usual duplexing where the top of both pages is on the same edge of the sheet.

-format paperformat
This option selects the media (e.g. paper size) that the printer control stream specifies. paperformat is one of the following self-explanatory keywords:

*
letter
*
legal
*
a3
*
a4
*
a5
*
a6
*
jb4
*
jb5
*
jb6
*
exec
*
ledger
*
b5envelope
*
c5envelope
*
com10envelope
*
monarchenvelope
*
dlenvelope
*
jpostcard
*
jdoublepostcard

The default is "letter".

-feeder N
This options selects the media source (e.g. paper tray) that the printer control stream specifies.

-copies N
This option specifies the number of copies that the printer control stream tells the printer to print.

-colorok
This option simply tells pnmtopclxl not to warn you if you supply a color input and therefore get color output. By default, pnmtopclxl issues a warning any time it produces a color printer stream because it is usually a mistake. It's a mistake because PCL XL is mainly used for laser printers, and laser printers are mainly black and white. If you send a color print stream to a black and white printer, it typically refuses to print anything, and even if it manages to convert it to black and white and print it, it takes 3 times as long to transmit a color stream to the printer than to transmit the grayscale image that gives the same result.

-rendergray
This option causes pnmtopclxl to include in the output stream a command to set the RENDERMODE environment variable to GRAYSCALE, which typically causes the printer to print in grayscale regardless of the colors in the input, and may cause it to run much faster even if the image is grayscale anyway.

This option was new in Netpbm 10.29 (August 2005).

-jobsetup=filename
This option causes pnmtopclxl to include arbitary job setup PJL commands at the beginning of the output stream. It reads them from the named file.

pnmtopclxl does not inspect these commands in any way, but it does expect them to be job setup commands. If you have garbage in your file, you will hear from the printer.

This option was new in Netpbm 10.29 (August 2005).

 

SEE ALSO

ppmtolj(1), pbmtolj(1), ppmtopj(1), ppmtopjxl(1), thinkjettopbm(1), ppm(1)

 

HISTORY

pnmtopclxl was added to Netpbm in Release 10.6 (July 2002). It was contributed by Jochen Karrer.


 

Index

NAME
SYNOPSIS
DESCRIPTION
OPTIONS
SEE ALSO
HISTORY

linux.jgfs.net manual pages